Dumps HPE7-A01 Reviews | Exam HPE7-A01 Bootcamp

It may be a contradiction of the problem, we hope to be able to spend less time and energy to take into account the test HPE7-A01 certification, but the qualification examination of the learning process is very wasted energy, so how to achieve the balance? The HPE7-A01 Exam Prep can help you make it. With the high-effective HPE7-A01 exam questions, we can claim that you can attend the exam and pass it after you focus on them for 20 to 30 hours.

The HP HPE7-A01 exam consists of 60 multiple-choice questions that cover a range of topics related to wireless networking, including network fundamentals, wireless LAN design, installation and configuration, troubleshooting, and security. HPE7-A01 Exam is timed and candidates have 90 minutes to complete it. To pass the exam, candidates must score at least 65%.

>> Dumps HPE7-A01 Reviews <<

Exam HP HPE7-A01 Bootcamp | Reliable HPE7-A01 Real Exam

We are confident about our HP HPE7-A01 braindumps tested by our certified experts who have great reputation in IT certification. These HPE7-A01 exam pdf offers you a chance to get high passing score in formal test and help you closer to your success. Valid HPE7-A01 Test Questions can be access and instantly downloaded after purchased and there are free HPE7-A01 pdf demo for you to check.

HP Aruba Certified Campus Access Professional Exam Sample Questions (Q31-Q36):

NEW QUESTION # 31
You are configuring Policy Based Routing (PBR) for a subnet that will be used to test a new default route for your network Traffic originating from 10.2.250.0/24 should use a new default route to 10.1.1.253. Other non-default routes for this subnet should not be affected by this change.
What are two parts of the solution for these requirements? (Select two.)

Answer: D,E

Explanation:
Explanation
These are the correct parts of the solution for the requirements of configuring Policy Based Routing (PBR) for a subnet that will be used to test a new default route for your network. Option A defines a PBR policy named test-default-route with a rule named new-default-route that matches traffic from source IP address
10.2.250.0/24 and sets the next hop IP address to 10.1.1.253. Option E applies the PBR policy to VLAN 10 interface, which is the subnet that needs to use the new default route. The other options are incorrect because they either do not match the correct traffic or do not set the correct next hop. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch02.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch03.html

NEW QUESTION # 32
The customer needs a network hardware refresh to replace an aging Aruba 5406R core switch pair using spanning tree configuration with Aruba CX 8360-32YC switches.
What is the benefit of VSX clustering with the new solution?

A. dual control plane provides better resiliency
B. stacked data-plane
C. dual Aruba AP LAN port connectivity for PoE redundancy
D. faster MSTP converge processing

Answer: A

Explanation:
VSX clustering is a feature that allows two Aruba CX switches to operate as a single logical device, providing high availability, scalability, and simplified management.
VSX clustering has several benefits over spanning tree configuration, such as:
* Dual control plane provides better resiliency. Unlike stacking, where switches share a single control plane, VSX switches have independent control planes that synchronize their states over an inter-switch link (ISL). This means that if one switch fails or reboots, the other switch can continue to operate without affecting traffic flows or network services.
* Active-active forwarding provides better performance. Unlike spanning tree, where some links are blocked to prevent loops, VSX switches use all available links for forwarding traffic, providing load balancing and increased bandwidth utilization.
* Multichassis LAG provides better redundancy. Unlike single-chassis LAG, where all member ports belong to one switch, VSX switches can form multichassis LAGs with downstream or upstream devices, where member ports are distributed across both switches. This provides link redundancy and seamless failover in case of switch or port failure.
References: https://www.arubanetworks.com/assets/tg/TG_VSX.pdf

NEW QUESTION # 33
Your customer has four (4) Aruba 7200 Series Gateways and two (2) 7000 Series Gateways. The customer wants to form a cluster with these Gateways.
What design consideration would prevent you from using all of those Gateways?

A. A combination of 7200 series and 7000 series gateways supports up to 4 nodes
B. A heterogeneous cluster is not supported in AOS 10.x.
C. The AP load should be lowest value of worst-case scenario load.
D. Multiple versions between Gateways in the same cluster profile are not allowed AOS 10.x.

Answer: B

Explanation:
The reason is that AOS 10.x does not support clustering gateways with different versions in the same cluster profile. A cluster profile defines the configuration settings for a group of gateways that are managed by Aruba Central.
According to the Aruba documentation2, "You can combine 7200 Series and 7000 Series gateways in the same cluster with a maximum size of four devices with reduced AP client capacity on 7000 Series gateways."

NEW QUESTION # 34
A new network design is being considered to minimize client latency in a high-density environment. The design needs to do this by eliminating contention overhead by dedicating subcarriers to clients.
Which technology is the best match for this use case?

A. Channel Bonding
B. OFDMA
C. MU-MIMO
D. QWMM

Answer: B

Explanation:
OFDMA (Orthogonal Frequency Division Multiple Access) is a technology that can minimize client latency in a high-density environment by eliminating contention overhead by dedicating subcarriers to clients. OFDMA allows multiple clients to transmit simultaneously on different subcarriers within the same channel, reducing contention and increasing efficiency. MU-MIMO (Multi-User Multiple Input Multiple Output) is a technology that allows multiple clients to transmit simultaneously on different spatial streams within the same channel, but it does not eliminate contention overhead. QWMM (Quality of Service Wireless Multimedia) is a technology that prioritizes traffic based on four access categories, but it does not eliminate contention overhead. Channel Bonding is a technology that combines two adjacent channels into one wider channel, increasing bandwidth but not eliminating contention overhead. Reference: https://www.arubanetworks.com/assets/ds/DS_AP510Series.pdf https://www.arubanetworks.com/assets/wp/WP_WiFi6.pdf

NEW QUESTION # 35
You are configuring Policy Based Routing (PBR) for a subnet that will be used to test a new default route for your network Traffic originating from 10.2.250.0/24 should use a new default route to
10.1.1.253. Other non-default routes for this subnet should not be affected by this change.
What are two parts of the solution for these requirements? (Select two.)

Answer: A,E

NEW QUESTION # 36
......

We would like to benefit our customers from different countries who decide to choose our HPE7-A01 study guide in the long run, so we cooperation with the leading experts in the field to renew and update our HPE7-A01 study materials. We can assure you that you will get the latest version of our HPE7-A01 Training Materials for free from our company in the whole year after payment. Do not miss the opportunity to buy the best HPE7-A01 preparation questions in the international market which will also help you to advance with the times.

Exam HPE7-A01 Bootcamp: https://www.pdfdumps.com/HPE7-A01-valid-exam.html

Tom White Tom White

Biography

Dumps HPE7-A01 Reviews | Exam HPE7-A01 Bootcamp

Exam HP HPE7-A01 Bootcamp | Reliable HPE7-A01 Real Exam

HP Aruba Certified Campus Access Professional Exam Sample Questions (Q31-Q36):

login